[What are the properties of polypropylene staple fiber products?]
Release date:[22:39:29] Read a total of [280] time

The polypropylene staple fiber has a lot of excellent performance, which is mainly reflected in the following four aspects:

First, it has superior moisture conductivity, flexibility, net and combing, and thermal adhesion.

The second quality is light, and its density is 0.9 to 0.92 grams/cubic centimeter. It is the lightest among all synthetic fibers. ; High strength (the same dry state and wet state), good abrasion resistance and rejection; anti -microorganisms, not moldy and not moth; chemical resistance is also better than general synthetic fibers.

Third, compared with other synthetic fibers, the electrical insulation and thermal insulation of proparbly fibers are the best. Its resistance is very high (7 × 1019 ohm centimeters), and the thermal conductivity coefficients are small.

Fourth, high intensity, strong curling elasticity, light weight, low melting point, good surface permeability, acid -alkali resistance and abrasion resistance are better than other fibers.

The above four points are some of the properties of polypropylene staple fibers.

There are two main properties of polypropylene staple fibers:

The first performance is superior moisture conductivity, flexibility, and excellent sortability and thermal adhesion.

The second is high intensity, strong curling elasticity, light weight, low melting point, good surface permeability, and acidic and alkali resistance than other fibers.

Polypropylene staple fiber is mainly used for acupuncture carpet, car interior, non -woven fabric, rope, decorative materials, medical and health supplies, etc.

Taizhou Hailun Chemical Fiber Co., Ltd. was formerly known as the Chenguang synthetic fiber factory in Taizhou City. It was founded in 1995. It is a technical chemical fiber company specializing in the development, production, and sales of short fiber fibers. The company currently has more than 170 employees, covers an area of 54,000 square meters, a factory building of 20,000 square meters, and an office building of 5,500 square meters. The company has 5 advanced automatic fibrine short fiber production lines with an annual design capacity of 50,000 tons. The company has established a comprehensive pallon short fiber detection laboratory with a full set of fibrous detection instruments and the ability to develop new products for neighborly fibrous fiber. As a Chinese pallon fiber manufacturer, the company produces a series of pallon short -fiber products, and its main application scope includes the automotive industry, civil engineering, liquid filtration, home furnishings, and textiles. The company has passed ISO9001: 2015 international quality system certification.


Relevant keywords:
Jiangsu Haibang New Materials Co., Ltd. Tel: +86 13852860709 Fax: +86 0523-86811428 Address: Factory 1: No. 9, Donglian Road, Binjiang, Taizhou City, Jiangsu, China 225300 Factory 2: Hailun Road, Sixiang Town, Taizhou City, Jiangsu, China 225300
Copyright: Jiangsu Haibang New Materials Co., Ltd. Technical support: China polypropylene network