Polypropylene staple fiber has the advantages of light weight, high strength, wear resistance, environmental protection, easy to clean and so on. This kind of polypropylene staple fiber is known as the polypropylene staple fiber of Wei material. Polypropylene staple fiber is suitable for making all kinds of needled non-woven fabric, non-woven fabric, decorative non-woven fabric and so on.

Polypropylene staple fiber can also be used in geosynthetic materials, such as geotextiles, geomesh, etc. For nonwoven filter materials; Medical and health materials; Agricultural, clothing, home decorative cloth and so on a variety of different industries.

Polypropylene staple fiber light, its density is 0.9 ~ 0.92 grams/cubic centimeter, in all synthetic fibers is lighter, it is 20% lighter than polyamide fiber, 30% lighter than polyester fiber, 40% lighter than viscose fiber; High strength (dry and wet state is the same), good wear resistance and resilience; Anti-microbial, no mildew, no decay; Chemical resistance is also better than the general synthetic fiber. In addition, compared with other synthetic fibers, polypropylene fiber has the best electrical insulation and heat retention, it has a high electrical resistivity (7×1019 ohms · cm), and a small thermal conductivity.

However, the melting point of Polypropylene staple fiber is low (165 ~ 173℃), and the stability of light and heat is poor, so the heat resistance and aging resistance of polypropylene fiber are poor. Usually, heat stabilizer and anti-aging agent are added to improve its performance. Its hygroscopic and dyeing properties are the worst in the synthetic fiber, the moisture recovery rate is less than 0.03%, ordinary dyes can not make it colored, so in the spinning process of raw material polypropylene to add a certain amount of coloring masterbatch to make the fiber colored.

Taizhou Hailun Chemical Fiber Co., LTD., formerly known as Taizhou Chenguang Synthetic Fiber Factory, was founded in 1995. It is a technology-based chemical fiber enterprise specializing in research and development, production and sales of polypropylene staple fiber. The company has more than 170 employees, covers an area of 54,000 square meters, plant of 20,000 square meters, office building of 5,500 square meters. The company has 5 advanced automatic polypropylene staple fiber production lines, with an annual designed capacity of 50,000 tons. The company has established a perfect polypropylene staple fiber testing laboratory, with a full set of fiber testing instruments, with the capability of new product research and development of polypropylene staple fiber. As a manufacturer of polypropylene staple fiber in China, the company produces a full range of polypropylene staple fiber products for the automotive industry, civil engineering, liquid filtration, sand distribution, Eisai and textile industries. The company has passed ISO9001:2015 international quality system certification.